The raw glass for manufacturing insulating glass machine can be colorless float glass, coated glass, tempered glass, laminated glass, etc. You should avoid using ordinary flat glass. The transparency and strength of ordinary flat glass do not meet the requirements. The above-mentioned raw glass must meet the requirements of corresponding standards and can only be used after passing the inspection.
Different batches of glass from different manufacturers should first be checked for color differences before cutting, and glass with larger color differences should be used in different projects or different building facades.
The cutting size of the glass should be strictly implemented according to the drawing requirements. At the same time, the operator should pay attention to the fact that there should be no obvious defects such as scratches or bubbles on the glass surface. The thickness of the aluminum strip used for inserting the aluminum strip should be between 0.30 mm and 0.35 mm, and the thickness should be uniform, the ventilation holes are evenly distributed, and the aluminum strips need to be anodized or decontaminated. Be sure to choose high-quality and high-grade products to improve the utilization rate of the aluminum strips.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.