1. The maintenance part is generally the maintenance of the brushes, sponge tubes and rotating bearings in the cleaning chamber. Since the lower end of the cleaning chamber is often wetted by water, special attention should be paid to the use of the lower bearings. The sponge tube must be completely soaked during use. Do the work again later, otherwise it is very easy to cause damage to the glass and sponge tube;
2. The fully automatic plate pressing section behind the production line is generally where the solenoid valve and cylinder are installed. Regular maintenance and upkeep should be paid attention to to ensure the lubrication effect;
3. The phenomenon of fogging inside the glass during the production process of insulating glass is caused by the unstable or substandard quality of the secondary sealant, which evaporates into the inside of the insulating glass under sunlight and causes fogging, or the desiccant is of poor quality. Low-molecular substances are released under sunlight and cause condensation;
We are producing IGU lines, Insulating Glass Argon Gas Filling Line, Insulating Glass Sealing Robot Line and all kinds of Special-Shaped Glass Sealing Robot, Insulated Glass household appliances with wire glue machine. We have our own technology to supply you Customizable IGU machines and lines.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.