The second reason is the problem of production technology during the production process. The first step in the production process of insulating glass is to clean the original glass sheets. This is also a step to ensure the quality of insulating glass, and it is also a very important step.
During the process of cleaning the glass, if the oil stains, water stains and other impurities on the surface of the glass are not washed away, and the two pieces of glass are laminated immediately, the adhesive force of the sealant to the glass will be greatly weakened. The sealing effect of the insulating glass is reduced, resulting in a loose seal between the two pieces of glass, and then mold appears.
Therefore, when we select materials such as aluminum spacers, sealants, sealing spacers, and desiccants, we must ensure that we use very clean original glass sheets, that is, we must ensure the standardization of the entire process. When applying glue, you must ensure that the sealant is full and even, especially the sealing properties of the four corners of the insulating glass, because these are the locations where air leakage is prone to occur in the entire insulating glass sealing system.
We are producing IGU lines, Insulating Glass Machine, Insulating Glass Argon Gas Filling Line, Insulating Glass Sealing Robot Line and all kinds of Special-Shaped Glass Sealing Robot, Insulated Glass household appliances with wire sealing machine. We have our own technology to supply you Customizable IGU machines and lines.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.