Recently, we discovered a problem when installing the machine. When the glass entered the next section after cleaning, we found that there would be residual water stains at the end of the glass. Why did this happen? How to solve this problem? Please following the article, we will find out.
We believe the reasons for this are as follows:
1. When the glass reaches the connecting section after cleaning, the speed of this section does not match the speed of the cleaning section. If the speed of the connecting section is greater than the speed of the cleaning section, the glass will be sent out before it is dried;
2. The angle at which the air knife is set may have a blind spot, making it impossible to dry the glass somewhere;
3. The pressure of the fan is not high enough and the wind speed of the air knife is not enough, so the glass cannot be dried.
If your insulating glass machine still has water stains after the glass is dried, please feel free to contact us.
We are producing IGU lines, Insulating Glass Argon Gas Filling Line, Insulating Glass Sealing Robot Line and all kinds of Special-Shaped Glass Sealing Robot, Insulated Glass household appliances with wire glue machine. We have our own technology to supply you Customizable IGU machines and lines.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.