How to adjust the sealant of the insulating glass sealant machine? The correct design can not only ensure the sealing quality of the product, but also greatly improve the work efficiency. The following are detailed steps and key points for the sealant mixing process. Please follow our steps and take a look together.
The 【Main Menu】 interface includes 【Maximum Sealing Speed】, 【Minimum Sealing Speed】, 【Sealing Pressure】, 【Basic Depth】, 【Basic Speed】, etc. There are several points to note when adjusting these parameters: First of all, the maximum sealing speed is normally 35-40 m/min, the minimum sealing speed is 5 m/min, and no modification is allowed. The sealing pressure is normally 30-100 km. Under normal circumstances, we can also adjust it according to the viscosity of the sealant. The basic depth is 5-8 mm, the normal fixing is 5 mm, and the basic speed is 5-35 m/min. This parameter is also adjusted according to our specific needs and the viscosity of the sealant. If you want the speed to be faster, just increase the speed. If you want the speed to be slower, adjust it lower. After adjusting these parameters, be sure to remember to save the data.
We are producing IGU lines, Insulating Glass Argon Gas Filling Line, Insulating Glass Sealing Robot Line and all kinds of Special-Shaped Glass Sealing Robot, Insulated Glass household appliances with wire glue machine. We have our own technology to supply you Customizable IGU machines and lines.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.