The glue is not evenly applied, the machine cannot glue normally, and the glue is applied more or less. Why?
The first and most critical point is the hydraulic system. Uneven glue application has a lot to do with the stability of the hydraulic station. If the pressure is 5 at the beginning of the glue sealing, but as the glue application time increases, the glue sealing pressure will also change. When the pressure drops to 4.5, the glue application will definitely not be full;
The second point is whether the data displayed by the scanning ruler is accurate during installation and debugging. If the data shows that the scanning depth is 10, but the depth measured with the ruler is not 10, the accuracy of the glue application will also be affected.
The above two points are the core of the entire machine. Other places have much less impact on the degree of glue application, so you must check it early when you encounter problems.
We are producing IGU lines, Insulating Glass Argon Gas Filling Line, Insulating Glass Sealing Robot Line and all kinds of Special-Shaped Glass Sealing Robot, Insulated Glass household appliances with wire sealing machine. We have our own technology to supply you Customizable IGU machines and lines.
If you want to know more about our insulating glass machine line, welcome to subscribe to our YouTube channel.